Horizontal and Vertical Alternatives: These are products that meet the aspiration needs of hospitals in critical areas such as operating rooms, intensive care, emergency services and laboratories, with compact / modular design, sliding shelf system that provides ease of access and maintenance, and horizontal system alternatives suitable for the residential area.
Ensuring that the vacuum pumps in the vacuum plant work in harmony - PLC controlled
Bacteria filter with 30 μm bacteria capture
Air cooled, oil type vacuum pump
VAC Plus Oil-Free Type Central Vacuum Plants: Designed to provide the vacuum required by hospitals and laboratories
Plants consisting of high-tech, hook type, oil-free pumps
3-pump bunk type TRIBLEX system
PLC controlled fully automatic operation
Constant Vacuum System to keep the vacuum level in the line stable
These systems are produced with single and double motor systems and are designed to be used to remove the waste gas generated in anesthesia devices from the environment. It detects pressure differences in the system and automatically activates and discharges anesthesia gas from several outlets simultaneously. They are products with single and double pump alternatives according to the need.
The power plant ensures continuity in gas supply and has functionality designed according to the principle of uninterrupted gas transfer during cylinder change. Gas power plants can be produced in different capacities according to the type of gas used and access distance.
Change Over Central Gas Station activates when there is a bar drop in gases such as Oxygen, Nitrous Oxide, Entonox due to any system failure such as power outage and operates the backup gas systems. Thus, it ensures that the hospital continues to use vital gases without any problems and uninterruptedly during the malfunction. All pressure data and fault alarms are controlled by the digital control panel. It offers higher flow rates and smoother flow rate curve with two-stage regulation system by using separate regulation units for each stage of pressure regulation. The station is equipped with check valves to prevent gas discharge from the cylinders during operation. The station is equipped with modern valves to prevent gas discharge from the cylinders during replacement or in case of leakage from the pipeline.
They are transparent products that allow external monitoring of the relevant gas names and vacuum meter values and have a locked cover design that allows only the relevant technical personnel to intervene. There is an alarm indicator. There are flush and surface mounted options. It has O2, N2O, medical air 4, surgical air 7 and vacuum connection.
It is a system that gives audible and visual signals in case of deviation in pressure values, suitable for use in O2 and N2O power plants, controls the pressure values in central power plants and other usage areas, detects pressure changes, works with high pressure switch and positive pressure sensor.
These are systems that give visual and audible alarms in high and low pressure situations. There are alternatives to choose from single gas to five gases depending on the need. It has a display screen that allows digital monitoring of instant gas pressure values.
Designed for use in medical gas installations, it is ready for use after being degreased by passing through special baths. Produced to withstand 16 bar pressure. They are products with copper pipe options in different diameters suitable for the needs.