It displays 4 simultaneous calls, other calls are kept in queue and displayed in order of priority. The panel has a total capacity of 64 beds. Each call indicator has 3 status LEDs on the left and can alert in different tones according to the type of call. There is also a mute button.
5 haneli ayarlanabilir oda yatak numara planı
433 Mhz Çalışma Frekansı
Entegre seri port çıkışı yardımı ile bilgisayar üzerinden programlama ve raporlama
The bedside unit is mounted on the patient bedside console. There are nurse call and call end buttons on the panel. The bedside unit and patient hand set are connected with the help of RJ45 socket on the bedside unit. It is aesthetic and has a durable structure.
This product is also the intermediary unit to which the hand set is connected.
It has a battery life of two years.
ABS raw material is used.
Manual programming mode via panel
Emergency call and reset buttons illuminate at the moment of call to provide dispatch information
The patient hand set allows hospital staff to be notified quickly of a patient's condition in an emergency. It is easy to use, which is further reinforced by auxiliary visuals. The product works connected to the bedside unit. Easy to understand auxiliary visuals guide the patient according to their needs. Call dispatch is confirmed by the LEDs on it. It has an ergonomic form.
It is used in toilets or bathrooms in patient rooms. In case of an emergency, the patient gives an emergency call by pulling the rope under the product. It appears as an emergency toilet call on the nurse's console. This call is evaluated as emergency by the system. Therefore, it is prioritized over waiting normal calls. It has a call termination button and a call start rope.
The over-door corridor lamp is positioned above the room door in the corridor. Due to its semicircular form, the emergency situation inside the room is easily recognized. It gives warning with three different colors: red, green and blue. The color changes according to the status of the call. It is applied to flush-mounted junction boxes. In unsuitable cases, it is possible to install with a surface mounted case.
The MDS 7 Segment Two-Line Main Display is located in the waiting area. It displays the ticket number, the patient's counter number and the arrow pointing in the direction of that counter. When the patient sees the ticket number, they move according to the direction of the arrow to find the counter and continue their procedure.
Screens connected to the queue management system via wired or wireless network connection can be converted into corporate TVs that can broadcast advertisements, broadcast TV, display information and announcements, broadcast videos and photos instead of LED screens.
Semi-transparent full screen warning that attracts attention in ticket search.
From the ticket machine, each patient receives a ticket with their queue number. When it is the patient's turn, the ticket number is shown on the main display and displayed on the local display at the counter. It communicates wirelessly with the system.
120 cm ticket machine mounted on a metal stand.
58 mm industrial type thermal printer with automatic cutter.
It is a machine that can be placed on the table top and can fulfill the functions of all ticket machines. Each patient receives a ticket with a sequence number. When it is the patient's turn, the ticket number is displayed on the main display and also on the local display on the counter. It communicates wirelessly with the system.
It is the pager with which the employee can call the next ticket number in the queue. When the next ticket number is called, it is displayed on the main screen and on the local display at the same counter.
The number of people waiting is shown on the display.
It can transfer the transaction to another counter.
It can be personalized by entering a password.
Can work in parallel with virtual terminal software.